Stainless Steel 321 Round bar/ Wire
UNS S32100 Hollow Bar, ASTM A276 SS 321 Round Bars, DIN 1.4541 Forged Rods, DIN 1.4541 MIG Wire, 321 SS Flat Bars, Stainless Steel 321 Square Bars, 321 SS Wire Mesh, ASME SA276 SS 321 Black Bars.
About Stainless Steel 321 Round bar/ Wire
Nissan Steel is a leading manufacturer and exporter of Stainless Steel 321 Round bar. These Stainless Steel 321 Round bar have comparable general corrosion resistance to low carbon 304/304L. The heat-treated state, also known as the mild condition, is available for purchase for these Round bar, including SS 321 Round bar.
To produce our Stainless Steel 321 Round bar, we perform solution processing between 1675 and 1725 degrees Fahrenheit for 15 to 30 minutes while maintaining the temperature in that range. The Stainless Steel 321 bar must be cooled to below 60 degrees Fahrenheit using air or oil quench to convert to martensite fully.
For our Stainless Steel 321 Round bar, the ageing process typically occurs between 950 and 1150 degrees Fahrenheit, depending on the desired final qualities. Tempering of tack welded parts in these Stainless Steel can be performed in neutral atmospheres but not in lowering atmospheres due to the possibility of nitrogen contamination. The heat treatment is usually conducted in the air.
Our Stainless Steel Round bar can be used as a construction material up to 1500 degrees Fahrenheit. Carbide precipitation in the heat-affected area of welds in these Stainless Steel 321 Round bar is possible. Mild cracking may occur at around 1200 degrees Fahrenheit.
DIN 1.4541 T Bars Supplier, DIN 1.4541 Forged Rods Stockist, UNS S32100 Bright Bars Manufacturer, UNS S32100 H Bars Stockist, ASME SA276 SS 321 Black Bars Stockist, 321 SS Flat Bars Exporte.
Specification of Stainless Steel 321 Round bar/ Wire
| Specification | A276 / A479, SA276 / A479 |
| Dimension Standard | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Range | 3.17 MM TO 350 MM DIA |
| Size | Round Bar Size: 3mm~ 800mm Square Bar Size: 4mm* 4mm ~100mm* 100mm Flat Bar Size: 2mm ~ 100mm Hex Bar Size: 2mm ~ 100mm |
| Thickness | 50 mm to 6000 mm Long |
| Length | 1 To 6 Meters, Custom Cut Length |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
Ready stock of available for Stainless Steel 321 Round bar/ Wire
Equivalent Grades of Stainless Steel 321 Round bar/ Wire
| STANDARD | WERKSTOFF NR. | UNS | JIS | EN |
| SS 321 | 1.4541 | S32100 | SUS 321 | X6CrNiTi18-10 |
Chemical Composition of Stainless Steel 321 Round bar/ Wire
| Grade | C | Mn | Si | P | S | Cr | N | Ni | Ti |
| SS 321 | 0.08 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 17.00 - 19.00 | 0.10 max | 9.00 - 12.00 | 5(C+N) – 0.70 max |
Mechanical Properties of Stainless Steel 321 Round bar/ Wire
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Other Types of Stainless Steel 321 Round bar/ Wire
Dimensions Standard Of Stainless Steel 321 Round bar/ Wire
| Diameter or Width (mm) | Weight per meter | Sectional Area | Perimeter | |||
| Square (kg) | Round (kg) | Square (cm²) | Round (cm²) | Square (cm) | Round (cm) |
|
| 5.0 | 0.20 | 0.15 | 0.25 | 0.20 | 2.0 | 1.57 |
| 5.5 | 0.24 | 0.19 | 0.30 | 0.24 | 2.2 | 1.78 |
| 6.0 | 0.28 | 0.22 | 0.36 | 0.28 | 2.4 | 1.88 |
| 7.0 | 0.38 | 0.30 | 0.49 | 0.38 | 2.8 | 2.20 |
| 8.0 | 0.50 | 0.39 | 0.64 | 0.50 | 3.2 | 2.51 |
| 9.0 | 0.64 | 0.50 | 0.81 | 0.64 | 3.6 | 2.83 |
| 10 | 0.73 | 0.63 | 1.00 | 0.79 | 4.0 | 3.14 |
| 11 | 0.95 | 0.75 | 1.21 | 0.95 | 4.4 | 3.46 |
| 12 | 1.13 | 0.89 | 1.44 | 1.13 | 4.8 | 3.77 |
| 14 | 1.54 | 1.21 | 1.96 | 1.54 | 5.6 | 4.40 |
| 16 | 2.01 | 1.58 | 2.56 | 2.01 | 6.4 | 5.03 |
| 18 | 2.54 | 2.00 | 3.24 | 2.54 | 7.2 | 5.65 |
| 20 | 3.14 | 2.47 | 4.00 | 3.14 | 8.0 | 6.28 |
| 22 | 3.80 | 2.98 | 4.84 | 3.80 | 8.8 | 6.91 |
| 25 | 4.91 | 3.85 | 6.25 | 4.91 | 10.0 | 7.85 |
| 28 | 6.15 | 4.83 | 7.84 | 6.16 | 11.2 | 8.80 |
| 32 | 8.04 | 6.31 | 10.24 | 8.04 | 12.8 | 10.05 |
| 36 | 10.17 | 7.99 | 12.96 | 10.18 | 14.4 | 11.31 |
| 40 | 12.56 | 9.86 | 16.00 | 12.57 | 16.0 | 12.57 |
| 45 | 15.90 | 12.49 | 20.25 | 15.90 | 18.0 | 14.14 |
| 50 | 19.62 | 15.41 | 25.00 | 19.64 | 20.0 | 15.71 |
| 56 | 24.62 | 19.34 | 31.36 | 24.63 | 22.4 | 17.59 |
| 63 | 31.16 | 24.47 | 36.69 | 31.17 | 25.2 | 19.79 |
| 71 | 39.57 | 31.08 | 50.41 | 39.59 | 28.4 | 22.31 |
| 80 | 50.24 | 39.46 | 64.00 | 50.27 | 32.0 | 25.13 |
Size Of Stainless Steel 321 Round bar/ Wire
| Metric | US Bar | ASTM/ Canadian | Japanese | ||||
| Bar Size | Diam. (mm) | Bar Size | Diam. (Inch) | Bar Size | Diam. (mm2) | Bar Size | Diam. (mm) |
| 5 | 5 | #2 | 0.250 | 10M | 100 | 6 | 6 |
| 5.5 | 5.5 | #3 | 0.375 | 15M | 200 | 10 | 10 |
| 6 | 6 | #4 | 0.500 | 20M | 300 | 13 | 13 |
| 7 | 7 | #5 | 0.600 | 25M | 500 | 16 | 16 |
| 8 | 8 | #6 | 0.750 | 30M | 700 | 19 | 19 |
| 9 | 9 | #7 | 0.875 | 35M | 1000 | 22 | 22 |
| 10 | 10 | #8 | 1.000 | 45M | 1500 | 25 | 25 |
| 11 | 11 | #9 | 1.125 | 55M | 2500 | 29 | 29 |
| 12 | 12 | #10 | 1.250 | 32 | 32 | ||
| 14 | 14 | #11 | 1.375 | 35 | 35 | ||
| 16 | 16 | #12 | 1.500 | 38 | 38 | ||
| 18 | 18 | #13 | 1.600 | 41 | 41 | ||
| 20 | 20 | #14 | 1.750 | 44 | 44 | ||
| 22 | 22 | #15 | 1.875 | 48 | 48 | ||
| 25 | 25 | #16 | 2.000 | 51 | 51 | ||
| 28 | 28 | #18 | 2.250 | 57 | 57 | ||
| 32 | 32 | ||||||
| 36 | 36 | ||||||
| 40 | 40 | ||||||
| 44 | 44 | ||||||
| 50 | 50 | ||||||
Weight Chart Of Stainless Steel 321 Round bar/ Wire
| Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
| 3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
| 1/8" | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
| 5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
| 4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
| 3/16" | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
| 5mm | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
| 7/32" | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
| 6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
| 1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
| 7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
| 5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
| 8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
| 9mm | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
| 3/8" | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
| 10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
| 11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
| 7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
| 12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
| 1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
| 13mm | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
| 14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
| 9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
| 15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
| 5/8" | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
| 16mm | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
| 17mm | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
| 11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
| 18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
| 3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
| 2-1/2" | 7.576 | 24.856 | ||||||
| 2-5/8" | 8.354 | 27.409 | ||||||
| 2-3/4" | 9.169 | 30.083 |
industrial use fitting for Stainless Steel 321 Round bar/ Wire
Price Of Stainless Steel 321 Round bar/ Wire
| Stainless Steel Hex Bars | USD $2.0 - $10.09 / kg (FOB Price) on request |
| Stainless Steel Square Bars | USD $2.0 - $10.09 / kg (FOB Price) on request |
| Stainless Steel Welding Wire | USD $2.0 - $10.09 / kg (FOB Price) on request |
| Stainless Steel Flat Bars | USD $2.0 - $10.09 / kg (FOB Price) on request |
| Stainless Steel Threaded Bars | USD $2.0 - $10.09 / kg (FOB Price) on request |
Application Of Stainless Steel 321 Round bar/ Wire
We make sure that our every product is made of high quality raw material. We thoroughly test each and every product before dispatching it to our customers.
- Petrochemical Industries
- Power Generation Industries
- Food Processing Industries
- Oil & Gas Industries
- Sugar Industries
Testing Of Stainless Steel 321 Round bar/ Wire
We known for its accurate and perfect dimensions. We thoroughly test all our products before shipping them to the customers. We carry out destructive as well as non-destructive tests on all our products.
- Eddy Current Examining
- Hydrostatic Analysis
- Pitting Protection Test
- Power Generation Industries
- Positive Material Recognition
Packing Of Stainless Steel 321 Round bar/ Wire
We uses the most safest and the most effective ways of packaging for all types of deliveries. We pack our goods in various ways such as:
- Wooden Boxes
- Wooden Pallets
- Shrink-Wrapped
- Carton Boxes
- Wooden crates
People Also Search
Cities We Delivered
Country We Delivered
People Also Search
SS 321 Threaded Bars At Factory Price, 321 SS Rectangular Bar At Factory Price, 321 SS Triangle Bar Weight Calculator, ASME SA276 SS 321 Black Bars At Factory Price, SS 321 Ingot Bars Price Per Kg, ASME SA276 SS 321 Tig Wire Weight Chart, DIN 1.4541 Coil Wire Price List, DIN 1.4541 T Bars Catalogue, UNS S32100 Bright Bars Price List In India, 321 SS Wire Mesh Price Per Kg, 321 SS Flat Bars Weight Calculator, Stainless Steel 321 Square Bars Price List, Stainless Steel 321 Deformed Bars Price List, DIN 1.4541 Shaft Price List In India, DIN 1.4541 MIG Wire Catalogue, 321 SS PSQ Bar Weight Calculator.
Cities We Delivered
321 SS Wire Mesh Manufacturer in Ahmedabad, SS 321 Ingot Bars Manufacturer in Lucknow, 321 SS Rectangular Bar Supplier in Hyderabad, SS 321 Threaded Bars Supplier in Pune, 321 SS PSQ Bar Stockist in Bharuch, Stainless Steel 321 Square Bars Stockist in Pimpri-Chinchwad, DIN 1.4541 Forged Rods Stockist in Ahmedabad, UNS S32100 Electrode Wire Manufacturer in Daman, ASME SA276 SS 321 Tig Wire Exporter in Delhi, SS 321 Spool Wire Exporter in Punjab, UNS S32100 Hollow Bar Stockist in Nagpur, SS 321 Hex Bars Supplier in Coimbatore, DIN 1.4541 MIG Wire Stockist in Gujarat.
Country We Delivered
ASTM A276 SS 321 Round Bars Manufacturer in USA, 321 SS Flat Bars Exporter in Kuwait, UNS S32100 Bright Bars Manufacturer in Singapore, ASME SA276 SS 321 Black Bars Stockist in UAE, Stainless Steel 321 Deformed Bars Exporter in Iran, UNS S32100 Wire Exporter in South Africa, SS 321 Ingot Bars Manufacturer in Israel, ASME SA276 SS 321 Tig Wire Exporter in Lebanon, SS 321 Threaded Bars Supplier in Qatar, 321 SS PSQ Bar Stockist in Australia, 321 SS Rectangular Bar Exporter in Indonesia, DIN 1.4541 MIG Wire Stockist in UK, SS 321 Hex Bars Supplier in Saudi Arabia, SS 321 Spring bars Exporter in Syria, DIN 1.4541 T Bars Supplier in Jordan, SS 321 Welding Wire Stockist in Oman.
Stainless Steel Round Bar/ Wire
- Stainless Steel 304/ 304L/ 304H Round Bar/ Wire
- Stainless Steel 309 Round Bar/ Wire
- Stainless Steel 310/ 310S Round Bar/ Wire
- Stainless Steel 316/ 316L/ 316Ti Round Bar/ Wire
- Stainless Steel 317/ 317L Round Bar/ Wire
- Stainless Steel 321 Round Bar/ Wire
- Stainless Steel 347/ 347H Round Bar/ Wire
- Stainless Steel 410/ 420/ 430 Round Bar/ Wire
- Stainless Steel 446 Round Bar/ Wire
- Stainless Steel 904L Round Bar/ Wire
- Stainless Steel 15-5 PH Round Bar/ Wire
- Stainless Steel 17-4 PH Round Bar/ Wire