Stainless Steel 309 Sheets, Plates and Coil
SS 309 Perforated Sheet, DIN 1.4828 Ring, DIN 1.4828 Strip, UNS S30900 Circle, SS 309 Flats, ASME SA240 SS 309 Chequered Plate, 309 SS Shim Sheet.
About Stainless Steel 309 Sheets, Plates and Coil
Nissan Steel is a leading producer, manufacturer, and exporter of high-quality SS 309 Stainless Steel Sheets & Plates. The stainless steel with the UNS S30900 designation, commonly known as Alloy 309, was developed specifically for applications requiring resistance to corrosion at high temperatures.
The alloy maintains its non-cyclic condition even when heated to 1038 degrees Celsius (1900 degrees Fahrenheit). Frequent cycles of poor thermal oxidation resistance at around 1850 ° F (1010 ° C), using high chromium and nickel content 309 1832 ° F (1000 ° C), may result in an environment of sulfur due to alloys. Carburising is not recommended with this alloy.
It has only a modest level of resistance to carbon sequestration, making it suitable for use in very harsh conditions. Alloys that include 309 have the potential to become somewhat oxidised and to perform segmenting and thermal cycling tasks, but doing so will result in a decrease in the maximum temperature at which they may be used. The hardness level may be restored with a treatment at temperatures ranging from 1100 to 1150 degrees Fahrenheit (1100 to 2102 degrees Celsius) because alloy-charged sigma phase precipitation occurs at temperatures ranging from 1202 to 1742 degrees Fahrenheit (heated between 650 and 950 degrees Celsius).
We only use the highest possible quality materials when producing our Stainless Steel 309 Coils. This enables us to create highly durable products with high tensile strength, require less maintenance, are impervious to water and air, and resist harsh environmental conditions. The austenitic stainless steel that makes up our Stainless Steel 309 Sheets was explicitly designed for high-temperature corrosion-resistant applications.
The cost-effective Stainless Steel 310S Perforated Coils we offer can be made into either flat or long products, and the surfaces of both products can be hot-rolled, cold-formed, or coated. However, because it has a high chromium concentration of 25%, SS 310 Plates are more corrosion-resistant than most heat-resistant alloys. These plates must also maintain their dimensions throughout the hardening and tempering processes.
DIN 1.4828 Rolling Plate Supplier, SS 309 Slitting Coil Manufacturer, UNS S30900 Trim Strips Stockist, Stainless Steel 309 Hr Sheet Exporter.
Specification of Stainless Steel 309 Sheets, Plates and Coil
| Specifications | ASTM A240 / ASME SA240 |
| Dimensional specification | JIS, AISI, ASTM, GB, DIN, EN, etc |
| Width | 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Thickness | 4mm-100mm |
| Length | 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Surface Finish | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, chequered, embossed, hairline, sand blast, Brush, etching, Hot rolled plate (HR), Cold rolled sheet (CR), SATIN (Met with Plastic Coated) etc. |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Form | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc. |
| Surface Finish | No.1, No.4, No.8 Mirror Finish, 2B |
Ready stock of available for Stainless Steel 309 Sheets, Plates and Coil
Equivalent Grades of Stainless Steel 309 Sheets, Plates and Coil
| STANDARD | WERKSTOFF NR. | UNS |
| SS 309 | 1.4828 | S30900 |
Chemical Composition of Stainless Steel 309 Sheets, Plates and Coil
| Grade | C | Ni | Si | S | Mn | P | Cr | Mo |
| SS 309 | 0.20 max | 12.0 – 15.0 | 0.75 max | 0.03 max | 2.00 max | 0.045 max | 22.0 – 24.0 | – |
Mechanical Properties of Stainless Steel 309 Sheets, Plates and Coil
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| SS 309 | 8.0 g/cm3 | 1455°C (2650°F) | Psi – 89900 , MPa – 620 | Psi – 45000 , MPa – 310 | 45 % |
Other Types of Stainless Steel 309 Sheets, Plates and Coil
Dimensions Standard Of Stainless Steel 309 Sheets, Plates and Coil
Plate Metric Dimensions
| Surface finish | Thickness (mm) | Width (mm) |
| 2B – Cold rolled, heat treated, pickled, skin passed | 0.25–8.0 | max. 2032 |
| 2D – Cold rolled, heat treated, pickled | 0.4–6.35 | max. 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled | 0.4–8.0 | max. 2032 |
| 2R – Cold rolled, bright annealed | 0.25–3.5 | max. 1524 |
| 2H – Work hardened | 0.4–6.35 | max. 1524 |
| Polished, brushed | 0.5–4.0 | max. 1524 |
Imperial Dimensions of Plate
| Surface finish | Gauge (in) | Width (in) |
| 2B – Cold rolled, heat treated, pickled, skin passed | 10–24 | max. 72* |
| 2D – Cold rolled, heat treated, pickled | 12–24 | max. 60 |
| BA Mexinox only | 18–28 | max. 48 |
| Polished (not brushed) | 11–24 | max. 60 |
| Temper rolled Mexinox only | 13–29 | max. 48 |
Perforated Sheet Dimensions
| Hole Dia mm | Hole Centres mm | O/A | Finish | Tck mm | Full Sheet Size mm |
| 0.75 | 1.5 | 23% | 2B | 0.6 | 2000 x 1000 |
| 1 | 2 | 23% | 2B | 1.0 | 2000 x 1000 |
| 1.5 | 2.6 | 30% | 2B | 1.0 | 2000 x 1000 |
| 2 | 3.5 | 30% | 2B | 1.0 | 2000 x 1000 |
| 2 | 3.5 | 30% | 2B | 1.0 | 2000 x 1000 |
| 3 | 5 | 33% | 2B | 1.0 | 2000 x 1000 |
| 4 | 5.6 | 46% | 2B | 1.0 | 2000 x 1000 |
| 5 | 8 | 35% | 2B | 1.0 | 2000 x 1000 |
| 6 | 8 | 51% | 2B | 1.0 | 2000 x 1000 |
| 8 | 10 | 58% | 2B | 1,0 | 2000 x 1000 |
1D Finish Sheet Dimensions
| Size (mm) | Weight per plate (kg) | Size (mm) | Weight per plate (kg) |
| 2000 x 1000 x 3.0 | 51.0 | 4000 x 2000 x 6.0 | 408.0 |
| 2500 x 1250 x 3.0 | 79.7 | 2500 x 1250 x 8.0 | 213.0 |
| 3000 x 1500 x 3.0 | 115.0 | 3000 x 1500 x 8.0 | 306.0 |
| 2000 x 1000 x 4.0 | 68.0 | 4000 x 2000 x 8.0 | 544.0 |
| 2500 x 1250 x 4.0 | 106.0 | 2500 x 1250 x 10.0 | 266.0 |
| 3000 x 1500 x 4.0 | 153.0 | 3000 x 1500 x 10.0 | 383.0 |
| 2000 x 1000 x 5.0 | 85.0 | 4000 x 1500 x 10.0 | 510.0 |
| 2500 x 1250 x 5.0 | 133.0 | 4000 x 2000 x 10.0 | 680.0 |
| 3000 x 1500 x 5.0 | 191.0 | 2500 x 1250 x 12.0 | 319.0 |
| 4000 x 2000 x 5.0 | 340.0 | 3000 x 1500 x 12.0 | 459.0 |
| 2000 x 1000 x 6.0 | 102.0 | 4000 x 1500 x 12.0 | 612.0 |
| 2500 x 1250 x 6.0 | 159.0 | 4000 x 2000 x 12.0 | 816.0 |
| 3000 x 1500 x 6.0 | 230.0 |
Size Of Stainless Steel 309 Sheets, Plates and Coil
PLATE IMPERIAL SIZE
| Surface finish | Thickness (in) | Width (in) |
| 1 – Hot rolled, heat treated, pickled Plate & Sheet | .1000 – .3750 | max. 72 |
| 2R – Cold-rolled, bright-annealed Sheet & Plate | 0.002–0.06 | 0.118–25.551 |
| 2H – Work hardened Plate & Sheet | 0.002–0.06 | 0.118–24.803 |
| 2B – Cold rolled, heat treated, pickled, skin passed Sheet & Plate | 10–24 | max. 72* |
| 2D – Cold rolled, heat treated, pickled Plate & Sheet | 12–24 | max. 60 |
| BA Mexinox only | 18–28 | max. 48 |
| Deco Rolled-On Mexinox only | 14–28 | max. 48 |
| Polished Plate & Sheet (not brushed) | 11–24 | max. 60 |
| Temper rolled Mexinox only | 13–29 | max. 48 |
PLATE METRIC SIZE
| Surface finish | Thickness (mm) | Width (mm) |
| 1D – Hot rolled, heat treated, pickled Plate & Sheet | 2.4–12.7 | max. 2032 |
| 2R – Cold-rolled, bright-annealed Sheet & Plate | 0.05–1.50 | 3–649 |
| 2H – Work hardened Plate & Sheet | 0.05–1.50 | 3–630 |
| 2B – Cold rolled, heat treated, pickled, skin passed Sheet & Plate | 0.25–8.0 | max. 2032 |
| 2D – Cold rolled, heat treated, pickled Plate & Sheet | 0.4–6.35 | max. 1524 |
| 2E – Cold rolled, heat treated, mechanically descaled Sheet & Plate | 0.4–8.0 | max. 2032 |
| 2R – Cold rolled, bright annealed Plate & Sheet | 0.25–3.5 | max. 1524 |
| 2H – Work hardened Sheet & Plate | 0.4–6.35 | max. 1524 |
| Polished, brushed Plate & Sheet | 0.5–4.0 | max. 1524 |
| Deco | 0.3–3.5 | max. 1524 |
| Coil | 0.30–3.5 | max. 1,524 |
Weight Chart Of Stainless Steel 309 Sheets, Plates and Coil
| Thickness | Plate Weight per Unit Area | Density |
| 3/16 inches | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/4 inches | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/8 inches | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1/2 inches | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 5/8 inches | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3/4 inches | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 7/8 inches | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 inches | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/4 inches | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 1/2 inches | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 1 3/4 inches | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 inches | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/4 inches | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 1/2 inches | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 2 3/4 inches | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
| 3 inches | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
industrial use fitting for Stainless Steel 309 Sheets, Plates and Coil
Price Of Stainless Steel 309 Sheets, Plates and Coil
| Stainless Steel Sheets | USD $2.0 - $10.09 / kg (FOB Price) on request |
| Stainless Steel Plates | USD $2.0 - $10.09 / kg (FOB Price) on request |
| Stainless Steel Coils | USD $2.0 - $10.09 / kg (FOB Price) on request |
| Stainless Steel Strip | USD $2.0 - $10.09 / kg (FOB Price) on request |
| Stainless Steel Perforated Sheet | USD $2.0 - $10.09 / kg (FOB Price) on request |
Application Of Stainless Steel 309 Sheets, Plates and Coil
We make sure that our every product is made of high quality raw material. We thoroughly test each and every product before dispatching it to our customers.
- Petrochemical Industries
- Power Generation Industries
- Food Processing Industries
- Oil & Gas Industries
- Sugar Industries
Testing Of Stainless Steel 309 Sheets, Plates and Coil
We known for its accurate and perfect dimensions. We thoroughly test all our products before shipping them to the customers. We carry out destructive as well as non-destructive tests on all our products.
- Eddy Current Examining
- Hydrostatic Analysis
- Pitting Protection Test
- Power Generation Industries
- Positive Material Recognition
Packing Of Stainless Steel 309 Sheets, Plates and Coil
We uses the most safest and the most effective ways of packaging for all types of deliveries. We pack our goods in various ways such as:
- Wooden Boxes
- Wooden Pallets
- Shrink-Wrapped
- Carton Boxes
- Wooden crates
ASME SA240 SS 309 Chequered Plate At Factory Price, DIN 1.4828 Strip Catalogue, UNS S30900 Hot Rolled Plate Price List In India, SS 309 Perforated Sheet At Factory Price, UNS S30900 Rolls Price List In India, SS 309 Flats Price Per Kg, 309 SS Shim Sheet At Factory Price, DIN 1.4828 Plain Sheet Catalogue, UNS S30900 Circle Weight Chart, DIN 1.4828 Ring Price List, 309 SS Cold Rolled Sheet Weight Calculator, 309 SS Foils Weight Calculator.
Stainless Steel 309 Plates Stockist in Pimpri-Chinchwad, DIN 1.4828 Strip Stockist in Ahmedabad, 309 SS Shim Sheet Supplier in Hyderabad, UNS S30900 Rolls Manufacturer in Mumbai, 309 SS Foils Supplier in Hyderabad, DIN 1.4828 Ring Manufacturer in Vadodara, SS 309 Flats Stockist in Nashik, SS 309 Coils Supplier in Coimbatore, ASTM A240 SS 309 Sheets Manufacturer in Bengaluru, ASME SA240 SS 309 Chequered Plate Stockist in Chennai, SS 309 Perforated Sheet Supplier in Pune, UNS S30900 Circle Stockist in Bangalore.
UNS S30900 Clad Plate Stockist in Libya, SS 309 Slitting Coil Manufacturer in Israel, DIN 1.4828 Satin Supplier in Algeria, UNS S30900 Trim Strips Stockist in Saudi Arabia, 309 SS Polished Plate Stockist in Egypt, SS 309 2D Finish Plate Exporter in Syria, 309 SS Hot rolled Coils Manufacturer in Tunisia, SS 309 Cold rolled Coils Exporter in Yemen, ASME SA240 SS 309 Diamond Plate Exporter in Lebanon, ASTM A240 SS 309 Cr Sheet Supplier in Iraq, Stainless Steel 309 Hr Sheet Exporter in Iran, DIN 1.4828 Rolling Plate Supplier in Jordan.
Stainless Steel Sheets, Plates and coil
- Stainless Steel 304/ 304L/ 304H Sheets, Plates and coil
- Stainless Steel 309 Sheets, Plates and coil
- Stainless Steel 310/ 310S Sheets, Plates and coil
- Stainless Steel 316/ 316L/ 316Ti Sheets, Plates and coil
- Stainless Steel 321 Sheets, Plates and coil
- Stainless Steel 347/ 347H Sheets, Plates and coil
- Stainless Steel 410/ 420/ 430 Sheets, Plates and coil
- Stainless Steel 904L Sheets, Plates and coil
- Stainless Steel 15-5 PH Sheets, Plates and coil
- Stainless Steel 17-4 PH Sheets, Plates and coil