Cupro Nickel 90/10 Flanges
DIN 2.0872 RTJ Flanges, DIN 2.0872 Forging Facing Flanges, DIN 2.0872 Ring Type Joint Flanges, UNS C70600 Orifice Flanges, Cupro Nickel 90/10 Blind Flange, Cu-Ni 90-10 Slip On Flange.
About Cupro Nickel 90/10 Flanges
90% and 10% copper-nickel compositions, respectively, are used to make Copper Nickel Cu-Ni 90/10 flanges. As a result of the inclusion of iron and manganese, it has a greater level of corrosive resistance and high strength. It is a fantastic solution for use in maritime settings. This grade has outstanding anti-biofouling capabilities. These flanges can also function well in elevated heat and elevated settings. In oceanic waters, copper-nickel erodes very little. Amazingly, it can withstand ammonia SCC. Additionally, it performs admirably in settings with pitting and crevice corrosion. In essence, the power generating and gas processing sectors employ copper nickel 90/10 flanges. Every product in these businesses is put through a series of quality checks. However, these products are utilised extensively in the pharmaceutical industry. The majority of the product has shown to be suitable for usage in these sorts of businesses after passing all essential tests. Diamond blades, polishing wheels, and multi-discs are held in place for a wide range of purposes using copper nickel flange.
Properties of Cupro Nickel 90/10 Flanges:
- The properties of formability and fabricability will enhance with the presence of copper and nickel, making it simpler to produce and process using related equipment. The machining outcomes are comparable to those of other common copper-nickel grades.
- The strength of DIN 2.0872 Flanges is good at relatively high temperatures.
- Even at low temperatures, it retains the appropriate mechanical properties and has a stronger resistance to hydrogen corrosion. When exposed to fresh water, this grade has the capacity to develop a protective coating on its surface.
- These flanges can also be used with high-velocity fluids that corrode less quickly. Corrosion’s impact is reduced by this layer of protection.
- The amazing fabrication and welding characteristics, strong and resistant to hydrogen embrittlement, retention of mechanical characteristics down to cryogenic temperatures, and highly resistant to stress oxidation, erosion, and contamination in seawater and brackish water are all features that UNS C70600 Flanges offer designers and specifiers.
- After copper, nickel is the element incorporated in these flanges with the highest concentration.
- The testing process for the Copper Nickel 90/10 Flanges is fairly transparent; all significant tests and rules are adhered to in this case. Intergranular corrosion, hardness, and positive material identification tests are a few of the important tests that are crucial for the product’s purity, much like the flattering test.
- Even some of the essential applications come in sizes ranging from 12 to 36 with ASTM/ASME SB 61/62 requirements, etc.
UNS C70600 Lap Joint Flanges Manufacturer, Cu-Ni 90-10 Slip On Flange Supplier, DIN 2.0872 Ring Type Joint Flanges Supplier.
Specification of Cupro Nickel 90/10 Flanges
| Specification | ASTM B151 / ASME SB151 |
| Dimension Standard | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Standard | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
| Size | 1/2" (15 NB) to 48" (1200NB) |
| Class / Pressure | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Flange Face Type | Flate Face (FF), Raised Face (RF), Ring Type Joint (RTJ) |
| DIN Flanges | DIN 2527, 2566, 2573, 2576, 2641,2642, 2655, 2656, 2627, 2628, 2629, 2631, 2632, 2633, 2634, 2635, 2636, 2637,2638, 2673. |
| JIS Flanges | JIS B2220 5K, JIS B2220 10K, JIS B2220 16K, JIS B2220 20K |
| BS Flanges | BS4504 PN 6, BS 4504 PN 10, BS4504 PN 16, BS4504 PN 25, BS4504 PN 40, BS 4504 PN 64, BS 4504 PN 100, BS 4504 PN 160, BS 4504 PN 250, BS 10, BS Table D, BS Table E, BS Table F, BS Table H. |
Ready stock of Flanges available for Cupro Nickel 90/10 Flanges
Equivalent Grades of Cupro Nickel 90/10 Flanges
| STANDARD | UNS | WNR. | EN | AFNOR |
| Cupro Nickel 90/10 | C70600 | 2.0872 | NiCr20CuMo | Z2NCUD31-20AZ |
Chemical Composition of Cupro Nickel 90/10 Flanges
| Grade | Cu | Mn | Pb | Ni | Fe | Zn |
| Cu-Ni 90-10 | 88.6 min | 1.0 max | .05 max | 9-11 max | 1.8 max | 1 max |
Mechanical Properties of Cupro Nickel 90/10 Flanges
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Copper Nickel 90-10 | 0.323 lb/in3 at 68 F | 2260 F | 50000 psi | 20000 psi | 30 % |
Other Types of Flanges of Cupro Nickel 90/10 Flanges
Dimensions Standard Of Cupro Nickel 90/10 Flanges
| Nominal Size | Outside Diameter (OD) | Min. Thickness (T) | RF Dia. (R) | No. of Bolt Holes | Diameter of Holes | Bolt Circle (BC) | SO Bore ID (SB) | WN Bore ID (WB) | Dia. Hub Base (HB) | Dia. of Hub Top (HT) | SO LTH (SL) | WN LTH (WL) |
| 1⁄2 | 3.50 | 0.38 | 1.38 | 4 | 0.62 | 2.38 | 0.88 | 0.62 | 1.19 | 0.84 | 0.56 | 1.81 |
| 3⁄4 | 3.88 | 0.44 | 1.69 | 4 | 0.62 | 2.75 | 1.09 | 0.82 | 1.50 | 1.05 | 0.56 | 2.00 |
| 1 | 4.25 | 0.50 | 2.00 | 4 | 0.62 | 3.12 | 1.36 | 1.05 | 1.94 | 1.32 | 0.62 | 2.12 |
| 11⁄4 | 4.62 | 0.56 | 2.50 | 4 | 0.62 | 3.50 | 1.70 | 1.38 | 2.31 | 1.66 | 0.75 | 2.19 |
| 11⁄2 | 5.00 | 0.62 | 2.88 | 4 | 0.62 | 3.88 | 1.95 | 1.61 | 2.56 | 1.90 | 0.81 | 2.38 |
| 2 | 6.00 | 0.69 | 3.62 | 4 | 0.75 | 4.75 | 2.44 | 2.07 | 3.06 | 2.38 | 0.94 | 2.44 |
| 21⁄2 | 7.00 | 0.81 | 4.12 | 4 | 0.75 | 5.50 | 2.94 | 2.47 | 3.56 | 2.88 | 1.06 | 2.69 |
| 3 | 7.50 | 0.88 | 5.00 | 4 | 0.75 | 6.00 | 3.57 | 3.07 | 4.25 | 3.50 | 1.12 | 2.69 |
| 31⁄2 | 8.50 | 0.88 | 5.50 | 8 | 0.75 | 7.00 | 4.07 | 3.55 | 4.81 | 4.00 | 1.19 | 2.75 |
| 4 | 9.00 | 0.88 | 6.19 | 8 | 0.75 | 7.50 | 4.57 | 4.03 | 5.31 | 4.50 | 1.25 | 2.94 |
| 5 | 10.00 | 0.88 | 7.31 | 8 | 0.88 | 8.50 | 5.66 | 5.05 | 6.44 | 5.56 | 1.38 | 3.44 |
| 6 | 11.00 | 0.94 | 8.50 | 8 | 0.88 | 9.50 | 6.72 | 6.07 | 7.56 | 6.63 | 1.50 | 3.44 |
| 8 | 13.50 | 1.06 | 10.62 | 8 | 0.88 | 11.75 | 8.72 | 7.98 | 9.69 | 8.63 | 1.69 | 3.94 |
| 10 | 16.00 | 1.12 | 12.75 | 12 | 1.00 | 14.25 | 10.88 | 10.02 | 12.00 | 10.75 | 1.88 | 3.94 |
| 12 | 19.00 | 1.19 | 15.00 | 12 | 1.00 | 17.00 | 12.88 | 12.00 | 14.38 | 12.75 | 2.12 | 4.44 |
| 14 | 21.00 | 1.31 | 16.25 | 12 | 1.12 | 18.75 | 14.14 | 13.25 | 15.75 | 14.00 | 2.19 | 4.94 |
| 16 | 23.50 | 1.38 | 18.50 | 16 | 1.12 | 21.25 | 16.16 | 15.25 | 18.00 | 16.00 | 2.44 | 4.94 |
| 18 | 25.00 | 1.50 | 21.00 | 16 | 1.25 | 22.75 | 18.18 | 17.25 | 19.88 | 18.00 | 2.62 | 5.44 |
| 20 | 27.50 | 1.62 | 23.00 | 20 | 1.25 | 25.00 | 20.20 | 19.25 | 22.00 | 20.00 | 2.81 | 5.62 |
| 22 | 29.50 | 1.75 | 25.25 | 20 | 1.38 | 27.25 | 22.22 | 21.25 | 24.25 | 22.00 | 3.07 | 5.82 |
| 24 | 32.00 | 1.81 | 27.25 | 20 | 1.38 | 29.50 | 24.25 | 23.25 | 26.12 | 24.00 | 3.19 | 5.94 |
Size Of Cupro Nickel 90/10 Flanges
| Nom. Pipe Size | o | T1 | R | x | No.2/Dia. of Holes | Bolt Circle Dia. | L21 | H | B23 | L | B | r | L34 | B3 | D |
| 1/2 | 3.50 | 0.44 | 1.38 | 1.19 | 4-0.62 | 2.38 | 1.88 | 0.84 | 0.62 | 0.62 | 0.88 | 0.12 | 0.62 | 0.90 | 0.38 |
| 3/4 | 3.88 | 0.50 | 1.69 | 1.50 | 4-0.62 | 2.75 | 2.06 | 1.05 | 0.82 | 0.62 | 1.09 | 0.12 | 0.62 | 1.11 | 0.44 |
| 1 | 4.25 | 0.56 | 2.00 | 1.94 | 4-0.62 | 3.12 | 2.19 | 1.32 | 1.05 | 0.69 | 1.36 | 0.12 | 0.69 | 1.38 | 0.50 |
| 1-1/4 | 4.62 | 0.62 | 2.50 | 2.31 | 4-0.62 | 3.50 | 2.25 | 1.66 | 1.38 | 0.81 | 1.70 | 0.19 | 0.81 | 1.72 | 0.56 |
| 1-1/2 | 5.00 | 0.68 | 2.88 | 2.56 | 4-0.62 | 3.88 | 2.44 | 1.90 | 1.61 | 0.88 | 1.95 | 0.25 | 0.88 | 1.97 | 0.62 |
| 2 | 6.00 | 0.75 | 3.62 | 3.06 | 4-0.75 | 4.75 | 2.50 | 2.38 | 2.07 | 1.00 | 2.44 | 0.31 | 1.00 | 2.46 | 0.69 |
| 2-1/2 | 7.00 | 0.88 | 4.12 | 3.56 | 4-0.75 | 5.50 | 2.75 | 2.88 | 2.47 | 1.12 | 2.94 | 0.31 | 1.12 | 2.97 | 0.75 |
| 3 | 7.50 | 0.94 | 5.00 | 4.25 | 4-0.75 | 6.00 | 2.75 | 3.50 | 3.07 | 1.19 | 3.57 | 0.38 | 1.19 | 3.60 | 0.81 |
| 3-1/2 | 8.50 | 0.94 | 5.50 | 4.81 | 8-0.75 | 7.00 | 2.81 | 4.00 | 3.55 | 1.25 | 4.07 | 0.38 | 1.25 | 4.10 | 0.88 |
| 4 | 9.00 | 0.94 | 6.19 | 5.31 | 8-0.75 | 7.50 | 3.00 | 4.50 | 4.03 | 1.31 | 4.57 | 0.44 | 1.31 | 4.60 | 0.94 |
| 5 | 10.00 | 0.94 | 7.31 | 6.44 | 8-0.88 | 8.50 | 3.50 | 5.56 | 5.05 | 1.44 | 5.66 | 0.44 | 1.44 | 5.69 | 0.94 |
| 6 | 11.00 | 1.00 | 8.50 | 7.56 | 8-0.88 | 9.50 | 3.50 | 6.63 | 6.07 | 1.56 | 6.72 | 0.50 | 1.56 | 6.75 | 1.06 |
| 8 | 13.50 | 1.12 | 10.62 | 9.69 | 8-0.88 | 11.75 | 4.00 | 8.63 | 7.98 | 1.75 | 8.72 | 0.50 | 1.75 | 8.75 | 1.25 |
| 10 | 16.00 | 1.19 | 12.75 | 12.00 | 12-1.00 | 14.25 | 4.00 | 10.75 | 10.02 | 1.94 | 10.88 | 0.50 | 1.94 | 10.92 | 1.31 |
| 12 | 19.00 | 1.25 | 15.00 | 14.38 | 12-1.00 | 17.00 | 4.50 | 12.75 | 12.00 | 2.19 | 12.88 | 0.50 | 2.19 | 12.92 | 1.56 |
| 14 | 21.00 | 1.38 | 16.25 | 15.75 | 12-1.12 | 18.75 | 5.00 | 14.00 | 13.25 | 2.25 | 14.14 | 0.50 | 3.12 | 14.18 | 1.63 |
| 16 | 23.50 | 1.44 | 18.50 | 18.00 | 16-1.12 | 21.25 | 5.00 | 16.00 | 15.25 | 2.50 | 16.16 | 0.50 | 3.44 | 16.19 | 1.75 |
| 18 | 25.00 | 1.56 | 21.00 | 19.88 | 16-1.25 | 22.75 | 5.50 | 18.00 | 17.25 | 2.69 | 18.18 | 0.50 | 3.81 | 18.20 | 1.94 |
| 20 | 27.50 | 1.69 | 23.00 | 22.00 | 20-1.25 | 25.00 | 5.69 | 20.00 | 19.25 | 2.88 | 20.20 | 0.50 | 4.06 | 20.25 | 2.13 |
| 22 | 29.50 | 1.81 | 25.25 | 24.25 | 20-1.38 | 27.25 | 5.88 | 22.00 | 21.25 | 3.13 | 22.22 | 0.50 | 4.25 | 22.25 | 2.38 |
| 24 | 32.00 | 1.88 | 27.25 | 26.12 | 20-1.38 | 29.50 | 6.00 | 24.00 | 23.25 | 3.25 | 24.25 | 0.50 | 4.38 | 24.25 | 2.50 |
Weight Chart Of Cupro Nickel 90/10 Flanges
| Standard Of Flanges | Class Of Flanges | Diameter Of Flanges | Diameter Of Bolt Circle | Bolts Number | Size Of Bolt | Bolt Hole Diameter |
| AS4087 Flanges | PN14 Flanges | 95 | 67 | 4 | M12 | 14 |
| AS 2129 Flange | Table C Flanges | 95 | 67 | 4 | 13 | 14 |
| Table D Flanges | 95 | 67 | 4 | 13 | 14 | |
| Table E Flanges | 95 | 67 | 4 | 13 | 14 | |
| Table F Flanges | 95 | 67 | 4 | 13 | 14 | |
| Table H Flanges | 114 | 83 | 4 | 16 | 17 | |
| Table J Flanges | 114 | 83 | 4 | 16 | 17 | |
| ANSI B16.5 Flanges | ANSI 150 Flanges | 89 | 60 | 4 | 13 | 16 |
| ANSI 300 Flanges | 95 | 67 | 4 | 13 | 16 | |
| ANSI 600 Flanges | 95 | 67 | 4 | 13 | 16 | |
| ANSI 900 Flanges | 121 | 83 | 4 | 19 | 22 | |
| ANSI 1500 Flanges | 121 | 83 | 4 | 19 | 22 | |
| ISO 7005 (DIN) Flange | PN6 Flanges | 80 | 55 | 4 | M10 | 11 |
| PN10 Flanges | 95 | 65 | 4 | M12 | 14 | |
| PN16 Flanges | 95 | 65 | 4 | M12 | 14 | |
| PN20 Flanges | 90 | 60.5 | 4 | M14 | 16 | |
| PN25 Flanges | 95 | 65 | 4 | M12 | 14 | |
| PN40 Flanges | 95 | 65 | 4 | M12 | 14 |
Pressure Rating Of Cupro Nickel 90/10 Flanges
| Temp. ℃ | Pressure-ASME temperature rating for B16.47 by class, bar | |||||
| 75 | 150 | 300 | 400 | 600 | 900 | |
| -29 to 38 | 10.0 | 20.0 | 51.7 | 68.9 | 103.4 | 155.1 |
| 50 | 9.8 | 19.5 | 51.7 | 68.9 | 103.4 | 155.1 |
| 100 | 8.8 | 17.7 | 50.7 | 67.5 | 101.3 | 152.0 |
| 150 | 7.9 | 15.8 | 45.9 | 61.2 | 91.9 | 137.8 |
| 200 | 6.9 | 13.8 | 42.7 | 56.9 | 85.3 | 128.0 |
| 250 | 6.0 | 12.1 | 40.5 | 53.9 | 80.9 | 121.4 |
| 300 | 5.1 | 10.2 | 38.9 | 51.8 | 77.7 | 116.6 |
industrial use flanges for Cupro Nickel 90/10 Flanges
Price Of Cupro Nickel 90/10 Flanges
| Copper Nickel Forged Flanges | USD $5.19 - $10.48 / Piece (FOB Price) on request |
| Copper Nickel Blind Flanges | USD $5.19 - $10.48 / Piece (FOB Price) on request |
| Copper Nickel Slip On Flange | USD $5.19 - $10.48 / Piece (FOB Price) on request |
| Copper Nickel Socketweld Flanges | USD $5.19 - $10.48 / Piece (FOB Price) on request |
| Copper Nickel Long Weld Neck Flanges | USD $5.19 - $10.48 / Piece (FOB Price) on request |
Application Of Cupro Nickel 90/10 Flanges
We make sure that our every product is made of high quality raw material. We thoroughly test each and every product before dispatching it to our customers.
- Petrochemical Industries
- Power Generation Industries
- Food Processing Industries
- Oil & Gas Industries
- Sugar Industries
Testing Of Cupro Nickel 90/10 Flanges
We known for its accurate and perfect dimensions. We thoroughly test all our products before shipping them to the customers. We carry out destructive as well as non-destructive tests on all our products.
- Eddy Current Examining
- Hydrostatic Analysis
- Pitting Protection Test
- Power Generation Industries
- Positive Material Recognition
Packing Of Cupro Nickel 90/10 Flanges
We uses the most safest and the most effective ways of packaging for all types of deliveries. We pack our goods in various ways such as:
- Wooden Boxes
- Wooden Pallets
- Shrink-Wrapped
- Carton Boxes
- Wooden crates
Cupro Nickel 90/10 Blind Flange Price List, DIN 2.0872 RTJ Flanges Catalogue, UNS C70600 Loose Flanges Price List In India, ASTM B151 Cupro Nickel 90/10 Forged Flanges Weight Chart, DIN 2.0872 Threaded Flanges Catalogue, UNS C70600 Orifice Flanges Weight Chart, 90/10 Cupro Nickel Spades Ring Spacers Flanges Price Per Kg, 90/10 Cupro Nickel Expander Flanges Weight Calculator, UNS C70600 Lap Joint Flanges Price List In India, Cupro Nickel 90/10 SWRF Flanges Price Per Kg, Cupro Nickel 90/10 Longweld Neck Flange At Factory Price, 90-10 Cu-Ni Weldo / Nipo Flanges At Factory Price, UNS C70600 WNRF Flanges Price List In India.
90/10 Cupro Nickel Weldneck Flanges Supplier in Hyderabad, UNS C70600 WNRF Flanges Stockist in Karnataka, ASME SB151 Cupro Nickel 90/10 Socketweld Flange Stockist in Chennai, Cupro Nickel 90/10 Blind Flange Stockist in Pimpri-Chinchwad, 90/10 Cupro Nickel Spades Ring Spacers Flanges Manufacturer in Ahmedabad, DIN 2.0872 RTJ Flanges Stockist in Gujarat, 90/10 Cupro Nickel Expander Flanges Stockist in Kerla, UNS C70600 Lap Joint Flanges Manufacturer in Mumbai, Cu-Ni 90-10 Slip On Flange Supplier in Coimbatore.
Cupro Nickel 90/10 Longweld Neck Flange Supplier in Qatar, UNS C70600 Orifice Flanges Exporter in South Africa, ASME SB151 Cupro Nickel 90/10 Socketweld Flange Stockist in UAE, DIN 2.0872 Ring Type Joint Flanges Supplier in Jordan, 90/10 Cupro Nickel Spades Ring Spacers Flanges Manufacturer in Tunisia, DIN 2.0872 Threaded Flanges Stockist in Malaysia, ASTM B151 Cupro Nickel 90/10 SORF Flanges Supplier in Iraq, Cupro Nickel 90/10 SWRF Flanges Manufacturer in Israel, Cupro Nickel 90/10 Groove & Tongue Flanges Stockist in Oman.